Works with TraXwise

AgXeed Tool Control Unit (TCU)

Know what's happening with your implement, not just your machine.

When an AgBot is working autonomously, monitoring the machine is only part of the job. You also need to know whether the implement is operating as intended.

The AgXeed Tool Control Unit (TCU) connects implement sensors with TraXwise, allowing growers to monitor important implement functions during field operations.

Download AgXeed TCU Brochure (PDF), opens in a new tab

Enquiries: 08 7136 5160

How the TCU works

  1. Monitor

    Sensors fitted to the implement monitor selected functions.

  2. Detect

    The TCU identifies monitored conditions requiring attention.

  3. Report

    Information and alerts are communicated through TraXwise, including fault location where supported.

  4. Respond

    Depending on configuration, the system can warn the operator, record the event or initiate a machine stop.

What can the TCU monitor?

The table shows examples of monitoring functions AgXeed lists for the TCU. They need suitable sensors fitted to the implement and the TCU configured for the job; they are not standard equipment automatically included with every AgBot.

Implement monitoring examples listed by AgXeed for the TCU
ApplicationMonitoring functionResponse
SeedingHopper fill level and fan speed (rpm)Alert before the hopper runs empty; early warning of low fan speed
Deep rippingSensor on the tine for shear bolt failureMachine stop after a few seconds, with the location recorded
CultivationSensor on the crumbler roller or packerWarning, shown in TraXwise
Power harrowPTO speed and roller rpmMachine stop, with restart at the fault point
SprayingFlow sensor and boom pressureReal-time detection of a blockage or leak in the main distribution line
Weather stationWind speed, temperature, humidity and atmospheric pressure trendsWind warning or stop; temperature and humidity alerts; pressure trend to anticipate a weather change
PloughingSupport-wheel sensor, detecting a missed wheel transition during turningImmediate alert with location recorded in TraXwise

Monitoring functions and automatic responses depend on the implement, installed sensors and system configuration. Examples and responses as listed in the AgXeed TCU brochure.

What does this mean in the field?

Two scenarios described by AgXeed in its TCU brochure. Actual results depend on the implement, the sensors fitted and how the system is configured.

Manufacturer-described scenario

Broken shear bolt

A tine strikes an obstruction and breaks a shear bolt. A suitable sensor detects the failure and reports it through TraXwise. Where configured, the machine can stop so the issue can be investigated.

Manufacturer-described scenario

Seeder hopper running low

A fitted hopper-level sensor detects when the hopper is approaching empty. The system can warn the operator so the issue can be addressed before the implement runs out of seed.

Scenarios based on the AgXeed TCU brochure. They are not guaranteed outcomes.

Implement monitoring connected to TraXwise

TraXwise

Field planning, task monitoring, operational data and alerts.

Tool Control Unit (TCU)

Monitoring selected implement functions through connected sensors.

Together they give you information about both the machine's progress and the implement's operation. TraXwise shows where the AgBot is and how the job is progressing, while the TCU feeds implement information and alerts into TraXwise, so you can see whether the implement is doing its part of the job.

Can the TCU work with my existing implement?

The TCU can be configured to monitor selected functions on suitable agricultural implements. What can be monitored depends on the implement, the sensors that can be fitted and the required integration.

METLAN Distribution can work through your implement and monitoring requirements to assess what may be suitable.

The TCU does not automatically make every implement compatible with autonomous operation. Monitoring functions and responses depend on the implement, installed sensors and system configuration.

Downloads & Resources

Brochure published by AgXeed.

Explore more AgXeed

Want to monitor your implements during autonomous operation?

Talk to METLAN Distribution about your implement, the functions you'd like to monitor and how the AgXeed TCU could be configured for your operation.

Enquiries: 08 7136 5160

Leave a phone number or email so we can get back to you. Everything else is up to you.